High shoe, WRU back leather with WRU anti-scratch back
leather thickness 1,8-2,0 mm in the heel zone.
Perspiring and abrasion resistant fabric lining.
Soft leather tongue. Shoe with fast device and leather coverlaces stitched with fireproof thread.
Side strap closing.

TOECAP 200J polymeric composite non-thermic according to EN 12568
MIDSOLE flexible antiperforation composite fabric according to EN 12568
SOLE HARD ROCK ANTISTATIC bidensity polyurethane and antistatic RUBBER.
Sole resistant to hydrolysis ISO 5423:92, to hydrocarbons and to abrasion, anti-shock and anti-slipping SRC
INSOLE 4000, removable, anatomic, absorbing, antistatic and perspiring
HI heat insulation of sole complex
HRO resistance to hot contact of the outsole
Size 39-47 Shoe weight Sz 42 gr. 700

Calf boot, WRU anti-scratch leather thickness 1,8-2,0 mm.
Soft Windtex® water resistant membrane lining, with very good perspiration and abrasion resistance.
Boot with refracting fabric insert.
Soft, lined and padded tongue.

TOECAP 200J polymeric composite non-thermic according to EN 12568
MIDSOLE flexible antiperforation composite fabric according to EN 12568
SOLE HARD ROCK ANTISTATIC bidensity polyurethane and antistatic RUBBER.
Sole resistant to hydrolysis ISO 5423:92, to hydrocarbons and to abrasion, anti-shock and anti-slipping SRC
INSOLE 5000, three-materials extracomfort: perspiring, removable, anatomic, absorbing, ESD and anti-bacterial
CI cold insulation of sole complex -17°C
HI heat insulation of sole complex
WR water resistant shoe
HRO resistance to hot contact of the outsole 
Boot height sole included 23 cm
Size 39-47 Boot weight Sz 42 gr. 750.

High shoe, WRU anti-scratch back leather thickness 1,8-2,0 mm.
Perspiring and abrasion resistant fabric lining.
Soft, Windtex® water resistant membrane lining, with very good perspiration and abrasion resistance.
Shoe with refracting fabric insert. Soft, lined and padded tongue.
COMPLETELY METAL FREE SHOE

TOECAP 200J polymeric composite non-thermic according to EN 12568
MIDSOLE flexible antiperforation composite INSULATING fabric according to EN 12568
SOLE HARD ROCK INSULATING bidensity polyurethane and
INSULATING RUBBER resistant to hydrolysis ISO 5423:92, to hydrocarbons and to abrasion, anti-shock and anti-slipping SRC
-- The bottom of the shoe, within some limits (no humidity, it doesn’t concern the upper), offers electrical resistance against tension up to 1.000V - M Ω > 1.000
-- Electrical resistance: CSA Z195-14 Canadian standard increase 1 kV/sec - voltage 20.000V /60 hz - duration 1 minute
-- Electrical resistance: ASTM F2413-11 standard increase 1 kV/sec – voltage 20.000V/60 Hz – duration 1 minute
Electric flow requirement less than 1,0 mA INSOLE 4000, removable, anatomic, absorbing, antistatic and perspiring
DIELECTRIC INSOLE , removable, anatomic, absorbing, insulating and perspiring
FO sole resistance to hydrocarbons
E energy absorption on seat region
P antiperforation midsole
CI cold insulation of sole complex -17°C
HI heat insulation of sole complex
HRO resistance to hot contact of the outsole
WR water resistant shoe

Calf boot, IDROTECH® WRU full grain leather thickness
1,8-2,0 mm, with refracting insert.
Lining in felt with antibacterial aluminum WinTherm® safety
microfilm and ANTICOLD perspiring and abrasion resistant fur.
COMPLETELY METAL FREE BOOT

TOECAP 200J polymeric composite non-thermic according to EN 12568
MIDSOLE flexible antiperforation composite fabric according to EN 12568
SOLE HARD ROCK ANTISTATIC bidensity polyurethane and antistatic RUBBER.
Sole resistant to hydrolysis ISO 5423:92, to hydrocarbons and to abrasion, anti-shock and anti-slipping SRC
INSOLE 5000, three-materials extracomfort: perspiring, removable, anatomic, absorbing, ESD and anti-bacterial.
CI cold insulation of sole complex -30°C
HI heat insulation of sole complex
WR water resistant shoe
HRO resistance to hot contact of the outsole
Boot height sole included 28 cm
Size 39-47 Boot weight Sz 42 gr. 740

High shoe, WRU back leather thickness 1,8-2,0 mm.
Perspiring and abrasion resistant fabric lining.
Shoe with refracting fabric insert.
Soft, lined and padded tongue.

TOECAP 200J polymeric composite non-thermic according to EN 12568
MIDSOLE flexible antiperforation composite fabric according to EN 12568
SOLE HARD ROCK ANTISTATIC bidensity polyurethane and antistatic RUBBER.
Sole resistant to hydrolysis ISO 5423:92, to hydrocarbons and to abrasion, anti-shock and anti-slipping SRC
INSOLE 4000, removable, anatomic, absorbing, antistatic and perspiring
CI cold insulation of sole complex -17 °C
HI heat insulation of sole complex
HRO resistance to hot contact of the outsole
Size 39-47 Shoe weight Sz 42 gr. 585

Low shoe, suede back leather thickness 1,8-2,0 mm.
External 3D fabric, perspiring and resistant to abrasion.
Shoe with refracting fabric insert.
Soft, lined and padded tongue.
COMPLETELY METAL FREE SHOE

TOECAP 200J polymeric composite non-thermic according to EN 12568
MIDSOLE flexible antiperforation composite INSULATING fabric according to EN 12568
SOLE HARD ROCK INSULATING bidensity polyurethane and
INSULATING RUBBER resistant to hydrolysis ISO 5423:92, to hydrocarbons and to abrasion, anti-shock and anti-slipping SRC
-- The bottom of the shoe, within some limits (no humidity, it doesn’t concern the upper), offers electrical resistance agains tension up to 1.000V - M Ω > 1.000
-- Electrical resistance: CSA Z195-14 Canadian standard increase 1 kV/sec - voltage 20.000V /60 hz - duration 1 minute
-- Electrical resistance: ASTM F2413-11 standard increase 1 kV/sec – voltage 20.000V/60 Hz – duration 1 minute Electric flow requirement less than 1,0 mA
DIELECTRIC INSOLE , removable, anatomic, absorbing, insulating and perspiring
FO sole resistance to hydrocarbons
E energy absorption on seat region
P antiperforation midsole
HRO resistance to hot contact of the outsole
Size 39-47 Shoe weight Sz 42 gr. 580

Calf boot, WRU anti-scratch back leather thickness 1,8-2,0 mm.
Felt lining and tongue with antibacterial aluminium Wintherm® safety microfilm and ANTICOLD perspiring and abrasion resistant fur.
Shoe with refracting fabric insert.
Soft, lined and padded tongue.
OPENING BY ZIPPER

TOECAP 200J polymeric composite non-thermic according to EN 12568
MIDSOLE flexible antiperforation composite fabric according to EN 12568
SOLE HARD ROCK ANTISTATIC bidensity polyurethane and antistatic RUBBER.
Sole resistant to hydrolysis ISO 5423:92, to hydrocarbons and to abrasion, anti-shock and anti-slipping SRC
INSOLE 5000, three-materials extracomfort: perspiring, removable, anatomic, absorbing, ESD and anti-bacterial
CI cold insulation of sole complex -30°C
HI heat insulation of sole complex
WR water resistant shoe
HRO resistance to hot contact of the outsole
Boot height sole included 23 cm

Low shoe, WRU suede back leather, toe in anti-scratch leather
thickness 1,8-2,0 mm. Highly perspiring and abrasion resistant fabric lining. Soft, lined and padded tongue.
COMPLETELY METAL FREE SHOE

TOECAP 200J polymeric composite non-thermic according to EN 12568
MIDSOLE flexible antiperforation composite INSULATING fabric according to EN 12568
SOLE HARD ROCK INSULATING bidensity polyurethane and
INSULATING RUBBER resistant to hydrolysis ISO 5423:92, to
hydrocarbons and to abrasion, anti-shock and anti-slipping SRC
-- The bottom of the shoe, within some limits (no humidity, it doesn’t concern the upper), offers electrical resistance against tension up to 1.000V - M Ω > 1.000
-- Electrical resistance: CSA Z195-14 Canadian standard increase 1 kV/sec - voltage 20.000V /60 hz - duration 1 minute
-- Electrical resistance: ASTM F2413-11 standard increase 1 kV/sec – voltage 20.000V/60 Hz – duration 1 minute
Electric flow requirement less than 1,0 mA
DIELECTRIC INSOLE , removable, anatomic, absorbing, insulating and perspiring
FO sole resistance to hydrocarbons
E energy absorption on seat region
P antiperforation midsole
HRO resistance to hot contact of the outsole
Size 37-47 Shoe weight Sz 42 gr. 600

Low shoe, suede back leather thickness 1,8-2,0 mm.
External 3D fabric, perspiring and abrasion resistant.
Soft, lined and padded tongue
COMPLETELY METAL FREE SHOE

TOECAP 200J polymeric composite non-thermic according to EN 12568
MIDSOLE flexible antiperforation composite INSULATING fabric according to EN 12568
SOLE HARD ROCK INSULATING bidensity polyurethane and INSULATING RUBBER resistant to hydrolysis ISO 5423:92, to hydrocarbons and to abrasion, anti-shock and anti-slipping SRC
-- The bottom of the shoe, within some limits (no humidity, it doesn’t concern the upper), offers electrical resistance against tension up to 1.000V - M Ω > 1.000
-- Electrical resistance: CSA Z195-14 Canadian standard – increase 1 kV/sec - voltage 20.000V /60 hz - duration 1 minute
-- Electrical resistance: ASTM F2413-11 standard – increase 1 kV/sec voltage 20.000V/60 Hz – duration 1 minute Electric flow requirement less than 1,0 mA
DIELECTRIC INSOLE , removable, anatomic, absorbing, insulating and perspiring.
FO sole resistance to hydrocarbons
E energy absorption on seat region
P antiperforation midsole
HRO resistance to hot contact of the outsole
Size 39-47 Shoe weight Sz 42 gr 590